Melhores Abraçadeiras de Nylon Estabilizadas para Calor
O termo “estabilizado contra calor” aparece frequentemente ao descrever abraçadeiras de nylon, muitas vezes levando a mal-entendidos. A definição exata não é que as abraçadeiras estabilizadas contra calor podem suportar o calor gerado em um compartimento de motor para sempre, nem que a estabilização térmica indica qualquer forma de resistência aos raios UV. Na verdade, a estabilização térmica refere-se aos aditivos químicos adicionados ao nylon que retardam a degradação térmica do material de nylon, permitindo um aumento da temperatura de serviço de aproximadamente 20 °C (36 °F) em comparação com as abraçadeiras padrão de nylon e permitindo que a abraçadeira seja classificada para uma temperatura de serviço contínuo de aproximadamente 105 °C (221 °F).
Resposta rápida: As abraçadeiras padrão de nylon 6/6 têm uma classificação típica de serviço contínuo de aproximadamente 85 °C, enquanto as abraçadeiras de nylon estabilizadas contra calor têm uma classificação de temperatura de serviço contínuo de aproximadamente 105 °C. Os aditivos de estabilização térmica que permitem o aumento da classificação são inibidores de cobre e antioxidantes que previnem a degradação das abraçadeiras de nylon causada pela exposição tanto ao calor quanto ao cobre. Embora a estabilização térmica aumente a classificação de desempenho das abraçadeiras de nylon, não se pode assumir que as abraçadeiras estabilizadas contra calor sejam resistentes aos raios UV, a menos que contenham o pigmento negro de carbono encontrado nas abraçadeiras de nylon pretas. Portanto, se uma abraçadeira será exposta a condições externas, ela deve ser uma abraçadeira de nylon preta em vez de uma abraçadeira de nylon estabilizada contra calor.
As seções restantes discutirão os aditivos químicos usados na produção de abraçadeiras de nylon estabilizadas contra calor (e como eles afetam as abraçadeiras de nylon), as duas classificações para abraçadeiras estabilizadas contra calor e UV, uma comparação entre abraçadeiras estabilizadas contra calor e UV e no que cada fabricante se destaca, os tamanhos disponíveis de abraçadeiras de nylon, as faixas de preço para cada tipo de abraçadeira de nylon e o que cada tipo falha durante o serviço, a seleção de abraçadeiras de nylon por aplicação, o lugar da produção do fabricante dentro da indústria de abraçadeiras de nylon e como o cliente pode verificar as reivindicações do fabricante antes de fazer um pedido de compra.

O Que Realmente Significa Estabilizado Contra Calor
Nylon 6/6 é considerado um tipo de poliamida. Poliamidas degradam-se quando expostas ao calor devido à oxidação. Esse processo geralmente ocorre em uma taxa lenta à temperatura ambiente; no entanto, à medida que a temperatura aumenta, a velocidade da degradação também aumenta. Quando as abraçadeiras plásticas se degradam pela exposição a altas temperaturas, elas mudam de translúcidas para amarelas, marrons e então normalmente falham em algum momento devido à falta de elasticidade.
Como parte de sua propriedade de estabilização térmica, os fabricantes incorporam aditivos que previnem a oxidação interrompendo a reação em cadeia que leva à degradação do desempenho. Quando as empresas testam o desempenho de seus produtos de nylon, fazem isso usando a temperatura na qual um produto manteve uma porcentagem especificada de sua resistência original durante um período prolongado de exposição à temperatura de teste especificada.
Outra forma pela qual os produtos de nylon se degradam é através da degradação catalisada por cobre. O cobre envolto em condutores de cobre cria uma conexão direta com o metal de cobre. O ponto de contato faz com que o nylon oxide mais rapidamente do que em outros pontos na abraçadeira de nylon. A falha da abraçadeira de nylon por essa forma de degradação sempre ocorrerá no local em contato com o cobre. Portanto, um inibidor de cobre é incluído na formulação de estabilização térmica, e é por isso que as abraçadeiras de nylon estabilizadas termicamente são geralmente vendidas apenas em graus selecionados para uso em trabalhos elétricos, mesmo que não sejam necessariamente submetidas a altas temperaturas.
Os aditivos estabilizadores térmicos não elevam o ponto de fusão do nylon 6/6. Portanto, independentemente de uma abraçadeira de nylon ter sido estabilizada termicamente ou não, o ponto de fusão permanece aproximadamente em 250 graus centígrados e, assim, continua sendo um material inadequado para uso em temperaturas mais elevadas. Acima de aproximadamente 150 graus C, as abraçadeiras de nylon estabilizadas termicamente não servirão mais como um material apropriado e devem ser substituídas por outro polímero ou uma abraçadeira de aço inoxidável. Os limites máximos de temperatura associados à fabricação de abraçadeiras padrão de nylon especificam a temperatura na qual o nylon não é adequado para fins de engenharia, de modo que é importante que os projetistas se familiarizem com essas especificações antes de presumir que abraçadeiras de nylon estabilizadas termicamente são apropriadas para uso em ambientes de alta temperatura.

Os Dois Valores de Temperatura: 85 °C e 105 °C
O número 85 °C refere-se geralmente a produtos de nylon não apenas para aplicações permanentemente instaladas, mas também àqueles que são comumente vendidos em grandes quantidades. O número 105 °C refere-se a um produto de nylon correspondente que é estabilizado termicamente, e você deve procurar esse número quando a especificação indicar que deve ser usado em um local que possui alta temperatura (por exemplo, compartimentos de motor, balastros de iluminação, invólucros de equipamentos de comutação, caixas de junção solar).
| Grau | Temperatura (°C) | Faixa de Temperatura (°C) | Usos Típicos |
|---|---|---|---|
| Nylon 6/6 padrão | 85 °C | Até ~100 °C por um curto período | Agrupamento de cabos internos, painéis, gabinetes |
| Nylon 6/6 estabilizado termicamente | 105 °C | Até ~120 °C por um curto período | Balastros de iluminação, equipamentos de comutação, compartimentos de motor, solar |
| Nylon para alta temperatura | 125-150°C | Maior, dependendo do grau | Partes internas de aparelhos, próximo a aquecedores |
| Abraçadeiras ETFE ou PEEK | 150-200°C | Maior, dependendo do grau | Exposição química severa, calor extremo |
| Abraçadeiras de aço inoxidável | Acima de 500 °C | Não aplicável | Escape, fornos, estruturas externas |
Duas coisas devem ser lembradas para quaisquer dos valores nesta tabela: 1) A classificação de temperatura é aplicável apenas quando a abraçadeira está sendo usada continuamente na carga nominal total; e 2) Uma abraçadeira que está suportando sua resistência máxima à tração em um ambiente quente envelhecerá mais rapidamente do que uma que está suportando um terço de sua resistência à tração, e essa classificação de temperatura é baseada em um ambiente não confinado (circundado por ar), não uma caixa fechada, sujeita a temperaturas internas e externas.
Abraçadeiras de nylon estabilizadas contra calor são classificadas da mesma forma que suas especificações. Isso inclui como interpretar a alegação de um fornecedor sobre estabilização térmica, e o que solicitar, incluindo evidências de desempenho. Quando um cliente solicita abraçadeiras de nylon estabilizadas contra calor para temperaturas acima das capacidades do material fornecido, a especificação da abraçadeira de nylon estabilizada contra calor será seu ponto de referência.
Estabilização térmica não é estabilização UV, e a cor indica qual
Estabilização térmica e estabilização UV são dois pacotes distintos de aditivos para o produto. Portanto, é possível que uma abraçadeira de nylon tenha um tipo de estabilização, mas não ambos. A cor preta de uma abraçadeira de nylon indica que negro de carbono foi usado como estabilizador UV ao absorver a radiação UV antes que ela degrade a cadeia do polímero. Como o negro de carbono é preto, uma abraçadeira preta indica que foi projetada para uso externo, enquanto uma abraçadeira de nylon natural ou branca não oferece estabilização UV.
A estabilização térmica depende de químicas diferentes em comparação com a estabilização UV e essas diferenças não são visualmente identificáveis. Uma abraçadeira de nylon preta pode ou não ser estabilizada contra calor e é possível que uma abraçadeira de nylon estabilizada contra calor seja produzida em cor natural; portanto, não forneceria propriedades de estabilização UV. Essa diferença pode causar confusão, fazendo com que uma abraçadeira de nylon natural estabilizada contra calor falhe em um telhado dentro de dois anos se o instalador tivesse a impressão de que a especificação exigia estabilização térmica.
Além das duas propriedades de estabilização, a cor de uma abraçadeira de nylon fornece informações sobre a identificação do circuito ou feixe que a abraçadeira foi pigmentada para identificar. Por exemplo, abraçadeiras de nylon azuis, verdes, vermelhas, amarelas e cinzas são produzidas a partir de diferentes pigmentos que fornecem identificação de circuito ou feixe, mas esses pigmentos de cor geralmente reduzem as propriedades de estabilização UV da abraçadeira de nylon quando comparados à estabilização preta com negro de carbono.
A disponibilidade geral de abraçadeiras pretas no mercado indica a extensão da resistência UV para uso externo em geral e indica que um projeto que utilize outras cores de abraçadeiras no ambiente externo deve aceitar uma expectativa de vida reduzida e/ou um material de construção diferente. Cor e material são as respostas definitivas para se as abraçadeiras são resistentes a UV, thus the first thing to determine when evaluating Zip Tie UV resistance is to check the colour and material of the Zip Ties before reviewing the temperature rating.
The Brands Worth Shortlisting
The list below represents the individuals involved in developing the specification for Zip Ties. Each of these manufacturers provides a temperature rating, a UV resistance claim and a tensile rating for their products by size, and this is what allows a comparison between them.
| Marca | Product Location | Base/Product strength/Product Cost | Posição de preço |
|---|---|---|---|
| Panduit | Tinley Park, Illinois USA | Widest range/Published data/Controlled Tension Tooling | Mais alto |
| HellermannTyton | Milwaukee USA & Hamburg, Germany | Automotive panel building/Heat & chemical Grades | Alta |
| Thomas and Betts | Memphis Tennessee USA/ABB Group | Ty-Rap Stainless pawl/Electrical Distribution Market | Alta |
| 3M | St. Paul Minnesota USA | Speciality materials/adhesives & identification products | Alta |
| KSS | Japão | Precision moulding/Small sizes/Consistent quality | Mid to High |
| Nelco | Índia | Volume production/Competitive export pricing | Meio |
| Avery Dennison | Glendale California USA | Identification & Labelling Integration | Alta |
| Igoto | China | Factory supply/OEM/Private Label/UL listed ranges | Low to Mid |
The range between the highest-priced brand and the lowest-priced brand for equal-sized Zip Ties is three to four times higher than the lowest-priced option, and this does not account for all of the margins involved in the manufacturing process.
The differences between various manufacturers and the uses for their products can become confusing if you don’t look closely. In short, each manufacturer has advantages over another and each one provides specific products to meet specific needs.
What Each Brand Is Good At
The main advantage of Panduit is that they are the definitive source for specifications; all products manufactured by Panduit come with the manufacturer published values for tensile strength and retained strength during use.
HellermannTyton’s principal strengths are in automotive and panel building, where the product must tolerate vibration, oils and heat, in addition to maintaining its mechanical properties.
Thomas & Betts are the electrical distribution industry standard. The use of stainless steel pawls in their Ty-Rap ties provides a much better grip on the tied wire than does the nylon pawl of a similar product. Nylon pawls will soften and lose grip in heat while stainless steel pawls will maintain their grip.
KSS and Nelco provide volume options with better consistency than unbranded factory products. Avery Dennison provides a product that serves two purposes; it is a label as well as a tie.
We are at the factory end of the spectrum, with a broad range of products because of the various manufacturers that we represent.
Sizes, and Where Each One Fits
Tie sizes are generally determined by their bundle diameters; the more rope needed, the wider the rope will need to be. The chart below offers the general measurements and uses for most of the ties within the 4-inch and 14-inch range.
| Tie Length | Typical Tie Width | Tie Tensile Load | Tie Bundle Diameter | Aplicação |
|---|---|---|---|---|
| 4″ (100mm) | 5mm | 18 lb | Up to 22mm | Small harnesses/panel wiring |
| 6″ (150mm) | 6mm | 40 – 50 lb | Up to 35mm | General Cable Bundling |
| 8″ (200mm) | 8mm | 50 – 75 lb | Up to 50mm | Most Common Size in Plant |
| 11″ (280mm) | 4.8 – 7.6mm | 75 – 120 lb | Up to 80mm | Larger Looms, Conduit, Duct |
| 14″ (356mm) | 7.6mm | 120 – 175 lb | Up to 100mm | Heavy Bundles, Outdoor, Industrial |
The 8-inch size is the most popular because it provides the best fit for the typical control and power bundles, and that is the size that most plants have in stock. If a specification only covers the use of 4-inch and 14-inch ties, there is a strong chance that neither size will adequately cover the range of applications for which it needs to be used.
In terms of overall strength, the width of the strap is more important than the length, which is why the 14-inch tie is so much stronger.
Choosing a long and narrow tie is often the weakest combination and can happen by accident when there is a large bundle and all the stores only sell ties in one width.
What They Cost, by Size and Volume
All prices shown below (per one hundred) are for standard nylon, heat-stabilized nylon, and nylon with UV black coloration, as bagged products sold at the factory and distributor level; therefore, they correlate directly with the nylon resin prices as well as the prices for the additive packages used in the nylon.
| Tamanho | Standard Price (per 100) | Heat Stabilized Price (per 100) | UV Black Price (per 100) |
|---|---|---|---|
| 4-inch Tie, 18 LB | 3 to 7 dollars | 6 to 12 dollars | 5 to 10 dollars |
| 6-inch Tie, 40 to 50 LB | 5 to 10 dollars | 8 to 16 dollars | 7 to 14 dollars |
| 8-inch Tie, 50 to 75 LB | 6 to 12 dollars | 10 to 22 dollars | 8 to 18 dollars |
| 11-inch Tie, 75 to 120 LB | 12 to 22 dollars | 18 to 35 dollars | 15 to 30 dollars |
| 14-inch Tie, 120 to 175 LB | 18 to 32 dollars | 25 to 48 dollars | 22 to 40 dollars |
Furthermore, the heat-stabilized tie will typically cost about 40 to 60 percent more than standard ties of the same size due to the price of the additives used in the production of heat-stabilized ties and the greater control exercised during the manufacturing process of heat-stabilized ties. When considering the purchase of heat-stabilized ties in greater volumes, the price difference between the two types will be less and more attributable to the relatively small price increase of the additive when the cost of moulding and labour are spread across larger quantities.
In the majority of plants, a coloured heat-stabilised tie must be placed as a special order which will involve minimum quantities and longer lead times than a black or natural tie would be associated with.

Where These Ties Fail in Service
The majority of claims for tie failures can be attributed to four modes of failure, none of which relate to manufacturing defects in an ordinary sense.
- Thermal embrittlement occurs when a tie operates continuously at an excessive temperature, causing the polymer to oxidise and become brittle and break rather than elongate. When a tie fails due to thermal embrittlement, it will have a clean and brown fracture.
- Ultraviolet Degradation occurs when a coloured or milky-white tie is exposed to sunlight, causing the tie surface to develop chalking, leading to failure at the first point of binding.
- Creep failure occurs when a tie is subjected to a prolonged tensile load at a specific temperature, causing the tie to lose tension gradually and the tied bundle to lose its securing ability without breaking.
- Chemical Attack occurs when the nylon tie comes into contact with chemicals such as solvents, fuels, and hydraulic oils, resulting in softening of the nylon material, causing unrecoverable elongation or stretching.
In view of the presence of three of four modes of failure relating to environmental concerns rather than strength-related concerns, temperature, and ultraviolet exposure are the greatest determinants of how well a tie will perform, irrespective of its rated tensile strength. For example, a properly graded 50 lb tie would outlive a non-properly graded 175 lb tie, all other factors being equal.
Choosing by Application
The chart below illustrates a relationship between the common applications and the properly graded tie, assuming that the tie would be installed using the proper tensioning tool (rather than relying upon manual installation methods).
| Aplicação | Recommended grade |
|---|---|
| Panel and cabinet wire (indoors) | Standard or heat-stabilized |
| Switchgear/ballasts | Heat-Stabilized |
| Rooftop conduit/Solar junction boxes | Heat-Stabilized, UV-black |
| Engine Compartment/Machine Housing | Heat-Stabilized or High-Temp |
| Outdoor/Coastal/Rooftop Areas | Stainless Steel Band |
| Food and Pharmaceutical Areas | Detectable Nylon and Stainless |
| Circuit ID | Standard Colors, Indoor Use Only |
| Plant Room Cable Tray | Heat-Stabilized |
The solar junction box has historically been an area of confusion for purchasers, as the rooftop combiner box must both be hot and exposed. A single tie that carries claims on both heat and UV properties is more effective than two separate ties for each property.
Where Igoto Fits
Igoto manufactures nylon cable ties in standard grades (heat-stabilized/UV black) and heat-stabilized, with sizes ranging from 4” to 14”. Igoto supplies these ties both as private labels and under its own name to distributors.
The business segment that produces heavy-duty cable ties has a unique structure; it is essentially based upon two factors: yearly contracts and container quantities, where the differences in pricing between non-branded and branded products are the most pronounced.
For specification purposes, we provide evidence rather than adjectives, including the nylon grade, additive package, retained strength at 105 °C, and black nylon UV properties. While we cannot make claims about temperatures that the materials cannot hold up to, a request for a nylon cable tie at 150 °C will usually result in using another material, rather than simply raising an older number.
How to Verify a Claim
Distinguishing between a rated product and one that is labelled requires answering four questions. These include: what the continuous service temperature is and what test method was used to obtain that figure; what percentage of the original tensile strength is retained at that temperature after 1,000 hours; are black nylon cable ties UV stable with carbon black and to what test? and is there a batch-level tensile strength record available, or is there only a type test for a sample?
A supplier who can answer all four questions is a source of rated products. A supplier that deflects the remaining three questions while providing an answer to the first question is only a source of a heat-stabilized standard tie. It is common enough to ask these questions always.
To perform the fifth check, physically examine the product. Bend the product back onto itself and look for any visible signs of cracking or deterioration. This will take less than a minute.
A high-quality nylon cable tie will flex at the bend without developing a whited out zone at the bend; if the tie has too much filler or is made from a degraded material, it will develop white stress marks very quickly. This does not serve as a laboratory test for the cable ties in question; however, we are able to identify manufacturing defects in large numbers of cable ties during the shipment process.
Documentation will contain the answers to most of the questions about cable tie specifications; we do have a separate page for certification and test documentation, as well as a list of what is dispatched with each shipping container. This list will include all UL Listed Ranges that have this type of listing, RoHS and REACH Declarations, and any batch strength record.
Perguntas Frequentes
Is nylon rated for heat?
Nylon 6/6 is rated for continuous use at approximately 85°C. This is acceptable for Panels and Cabinets; however, it is not acceptable for Ballast Enclosures or Engine Bays. For Ballast Enclosures or Engine Bays, we offer two other grades of nylon: heat stabilized grades, which will provide use up to 105°C, and another grade of nylon for use above ~150°C. For applications above 150-160°C, a different polymer will be necessary or, alternatively, a stainless steel cable tie.
What is considered a heat stabilised cable tie?
A nylon zip tie that contains an additive package that slows thermal aging and protects it against copper catalyzed degradation. As it is not a different polymer, the melting point remains the same. It will not be UV stabilized unless the tie is black and the supplier indicates that it is.
What are some good heat resistant zip ties?
There are a few suppliers, including Panduit, HellermannTyton and Thomas & Betts, who maintain data on the retained strength of their product when exposed to temperature. The retained strength is the figure that should be used for product comparison between suppliers. KSS and Nelco produce similar product quality but at a lower cost, and Igoto manufactures the same grades as KSS and Nelco at factory level. The brand has less importance than the published retained strength figure (if available) and the grade.
For how long will nylon zip ties be outside?
In temperate climates, a UV stabilized black tie will typically last between five and ten years while a natural or coloured tie will generally last between one and three years. A black nylon tie will experience even faster degradation near the equator, and at high altitudes or in environments with a high salt content. Therefore, in these instances, the use of a stainless band would be a more practical option.
What does heat stabilized mean? Does it mean that I can put it in an oven or near an exhaust?
No. 105 °C is significantly below the temperature of an exhaust component and is well below the melting point of nylon. The term heat stabilized means that the tie can withstand higher temperatures for a more extended period and will not degrade as quickly due to prolonged exposure to a warm environment.
Can I use a black tie outside without checking anything else?
Black ties provide UV protection; therefore they fulfil one of the two necessary criteria. The other criteria is that they should be made to operate in extreme temperatures. Black standard ties (85 °C) are still considered black, so when using a tie on a rooftop or in a solar box, opt for black and heat stabilized.
Referências
- Panduit — Cable Tie Material and Temperature Ratings
- HellermannTyton — Cable Tie Selection by Application
- UL Solutions — Sistemas de Gestão de Cabos UL 62275
- NEMA — Wiring Products and Material Standards
- Grainger — Cable Ties and Material Specifications
Conclusão
Ao estabilizar termicamente uma abraçadeira de nylon, o usuário terá uma abraçadeira que pode suportar tanto um ambiente de alta temperatura (20 °C) quanto uma exposição prolongada ao cobre. No entanto, a estabilização térmica de uma abraçadeira não oferece proteção contra UV, pois a proteção UV é fornecida por um aditivo e cor separados. A estabilização térmica não afeta o ponto de fusão do nylon.
The two numbers to specify when ordering a nylon zip tie would be 105 °C and black (to provide UV protection). A nylon zip tie that is capable of withstanding both will perform adequately in a rooftop or ballast enclosure (i.e., to prevent failure) while it is still fresh, while a nylon zip tie that is capable of carrying one of the two will fail in the second summer.




